Welcome to Cixi Kangneng metal products Co., Ltd!

通用banner
Your current location: Home >> News >> Industry news

The advantages of blind rivets and the installation of blind rivets

2020-09-01 H:11:41
second

Core pulling riveting head is a riveting joint, which is suitable for application without open or closed components. The closed part of countersunk head color rivet refers to the part which cannot reach the far side of riveting equipment, that is, the key top. When selecting this type of connection, there is no need to design process safety channel for riveting equipment, and one side riveting can be carried out. Therefore, it can make the overall design of the commodity more compact and further reduce the volume and net weight of the product varieties. Blind bolt includes open type blind bolt, closed blind bolt, single drum brake blind bolt, multi drum blind bolt, inner lock bolt, outer lock bolt, fumeilai nail, small lantern bolt, etc.

The core pulling riveting head is named after the bolt forming method. In the riveting equipment, the shaft neck is removed and the rivet is produced on the far side of the riveting side, that is, the head of the bolt is generated.

Compared with solid bolt, riveting head has the following advantages:

1) The clamping force of the joint is more symmetrical, which improves the fatigue limit of the joint.

2) Riveting does not cause impact force, and can rivet some raw materials (such as plastic and carbon fiber materials, polymer materials) which are easily damaged by impact. The impact strength of solid core bolt bolt will not only destroy the bolt hole edge, but also cause the loose of high polymer material plywood, which will reduce the compressive strength of raw materials.

3) The working environment is personalized, special riveting tools can be brought (the specification of special riveting tools is similar to that of electric hand drill), and the riveting noise is small, which is beneficial to the health of operators.

4) Riveting is actually operated by one person, and it is impossible to carry out staff skills training. The color rivet riveting installation operation saves the cost (only one installation) and reduces the labor cost.

Two problems must be paid attention to when using key or key rivet connection

1) In the riveting connection, if the difference between the electrode potential of the two raw materials touching each other is very big (such as the contact between aluminum nail and thick steel plate or the contact between aluminum nail and steel plate), it will cause serious power engineering. Chemical corrosion. The solution to this problem is to apply appropriate bolt coating or appropriate countermeasures in the middle of RF connector, such as adding sealing ring, painting and maintaining vulcanized rubber. Generally, when the standard electric potential difference between the two raw materials does not exceed 0.9V, it can be safely touched.

2) In some components related to the actual operation safety of commodities, such as diesel engine, electric motor or gas turbine, or the short circuit fault of electrical products, it is very likely to cause major accidents. If each component of blind bolt is damaged (such as bolt), and the residual core falls down under obvious shock vibration, the residue is likely to fall into the operation organization Rivet connection is not suitable.

Open rivet connection. After the bolt is riveted, the journal is broken at the junction or periphery of the spindle head and the journal rod, and a small part of the spindle head and the journal rod is stored in the bolt body. Its shear strength is similar to that of hollow bolt connector.

Closed rivet connection. After the bolt is riveted, the bolt body remains closed. After sealing measures are adopted between the bolt body and the contact surface of the connecting parts, the structure can be used for sealing connection, and the blind rivets of drum brake can be connected together. After riveting the bolt, the top of the bolt body is drum shaped, which improves the tensile and shear strength.

Key rivet connection. During riveting, the bolt is first inserted into the hole of the connector, and then the core of the highlighted bolt body is knocked into the bolt body until it is flush with the wall top of the bolt body. At this time, the top of the bolt body expands to produce blind bolt. This kind of connection makes the installation quick and reasonable, the installation is extremely simple, does not need the unique installation special tool, the installation cost is extremely low. Key materials are sheet metal, wood and concrete; single and double-sided riveting connection can be used for cars, ships, communication products, mechanical equipment and furniture hardware.


安装抽芯铆钉的优点和注意事项抽芯铆钉厂家告诉您


Label

Recent:

Related products

Related news

Tel:13738803808                          QQ:376446328 / 642021393

E-mail:admin@nbcxkn.com         Add:No.391, luzhongxi District, Xinglu village, Andong Town, Cixi City

Website:www.nbcxkn.com

Scan QR code

Copyright © Cixi Kangneng metal products Co., Ltd Specializing inLantern rivet,Blind rivet manufacturer,Double drum rivet,Welcome to inquire!
Service support:huaqi